Fitoverm instructions for use, reviews, how to dilute

Despite its completely natural composition, Fitoverm is a rather toxic product, which is assigned a third class of hazard to humans, so when working with it certain precautions must be observed:

All manipulations with the drug are carried out wearing protective gloves, goggles and a respirator. Clothing should fit snugly to the body, covering all areas of it.
To prepare the working solution, use only special containers. It is unacceptable to dilute the insecticide in dishes that could accidentally mix with kitchen utensils.
During treatment, drinking, smoking and eating are prohibited.
Do not spray near animals and small children, as well as in close proximity to ponds and aquariums.
If the drug gets into your eyes, wash them with plenty of running water. The solution found on the skin is thoroughly washed off with soap and water. If Fitoverm is accidentally swallowed, you must immediately induce vomiting and then take several tablets of activated carbon (1 tablet per 10 kg of weight).
At the end of the event, you should wash all containers that were used during processing and put them away from small children and animals. Be sure to wash the clothes in which you sprayed and take a shower.
The product must be stored in a specially designated place strictly according to the instructions. The drug solution cannot be stored and must be used immediately after preparation. Do not use insecticide after the expiration date.

Fitoverm is a fairly popular biological drug that has proven itself to be positive. Its effectiveness in pest control is difficult to dispute, despite the presence of some disadvantages.

Instructions for use

General recommendations

The drug is applied to the plant by spraying as pests appear during the growing season of plants

Fitoverm treatment alone is not enough to completely destroy the pest. Repeated 2-3 treatments are recommended at intervals of 3-7 days, depending on the ambient temperature and the type of pest. Light precipitation, heavy dew, and low temperatures reduce the effectiveness of the drug.

The period of protective action is at least 7-20 days

Processing of vegetable crops

Culture	Pest	Consumption rate of the drug	Consumption rate of working solution	Waiting period	Frequency of treatments
Potato	Colorado beetle	4ml/1l.water	4l./ 100 sq.m.	1 day	3 times
Cabbage	Cabbage and turnip whites, cabbage cutworm, cabbage moth	8-16ml/1l.water	3-4l./ 100 sq.m.	2-3 days	2 times
Cucumber, tomato, pepper	Spider mites, thrips, whitefly	10ml./1l.water	10l./ 100 sq.m.	1-3 days	3 times
Tomato, pepper, eggplant	Aphid	8ml./1l.water	10l./ 100 sq.m.	3 days	2-3 times

Processing of berry and fruit crops

Culture	Pest	Consumption rate of the drug	Consumption rate of working solution	Waiting period	Frequency of treatments
Currant	Spider and kidney mites	2ml./1l.water	1l. on the bush	3 days	2-3 times
Currants, gooseberries	Moths, leaf rollers	1.5ml/1l.water	0.5-1l. on the bush	3-5 days	2 times
Apple tree	Ticks, leaf rollers, moths	1.5-2ml/1l.water	up to 5l. on the tree	3 days	1-2 times
Apple tree	Codling moth, cutworms	2ml./1l.water	up to 5l. on the tree	3 days	1 time

Processing of flower crops

Culture	Pest	Consumption rate of the drug	Consumption rate of working solution	Waiting period	Frequency of treatments
Flower crops in protected soil	Thrips	8ml./1l.water	10l./ 100 sq.m.	1 day	3 times
Flower crops in protected soil	Aphid	4ml./1l.water	10l./ 100 sq.m.	1 day	2-3 times
Flower crops in protected soil	Spider mite	2ml./1l.water	10l./ 100 sq.m.	1 day	3 times
Open ground flower crops	Aphid	8ml./1l.water	10l./ 100 sq.m.	1 day	3-4 times
Open ground flower crops	Spider mite	2ml./1l.water	10l./ 100 sq.m.	1 day	4 times
Open ground flower crops	Thrips	10ml./1l.water	10l./ 100 sq.m.	1 day	4 times
Indoor flowers	Spider mite	2ml./1l.water	0.1 l./ 1 sq. m.	1 day	4 times
Indoor flowers	Aphid	2ml/0.25l water	0.1 l./ 1 sq. m.	1 day	4 times
Indoor flowers	Thrips	2ml/0.2l water	0.1 l./ 1 sq. m.	1 day	4 times

The standards are based on the use of drugs with a concentration of the active substance of 2 g/l. "Aversectina-S".

When should Fitoverm treatment be carried out - timing of work

You can spray vegetable and fruit plants with this preparation from the first appearance of pests on crops.

The soil can be treated against pests after the harvest, when all the tops have been collected, and also in the spring before plants are planted in the beds and young leaves appear on the fruit trees.

Remedies for the Colorado potato beetle!
The best means to combat the Colorado potato beetle
. Important!

The product is dangerous for bees, therefore, during the flowering period of plants, treatment with Fitoferm cannot be carried out.

Spraying of vegetable and fruit crops with Fitoverm should be carried out in a dry, windless time (preferably before 10 am or after 18 pm).

Leaf blades are sprayed on both sides. The best temperature when spraying is +14+20 degrees Celsius. Treatment cannot be carried out against the wind. The drug begins to act after part of the day in greenhouse conditions, and in garden beds – from 1/3 to a day.

Waiting times

avermectins are quickly destroyed by sun and moisture;
the decay period on the soil surface is a day, on plants – no more than 72 hours;
half-life in water and soil is 1-7 days;
the drug has low toxicity for bees; after evening treatment it becomes absolutely safe every other day.

The poison remains in the bodies of insects and ticks for 7-20 days. Even if they survive, they become less voracious and their ability to reproduce decreases.

The drug is safe for plants (non-phytotoxic) and does not accumulate in their organs. After spraying, the fruits can be collected and eaten after 48 hours.

Precautionary measures

While working with the drug, it is forbidden to eat, drink or smoke.
The use of safety glasses, protective clothing, gloves and a respirator is mandatory.
After spraying, wash your face and hands with soapy water and rinse your mouth with clean water.

If you spill the drug, fill the area with some sorbent: sawdust, sand, peat or granulated clay, then collect the sorbent and neutralize it with a five percent alkali solution.

The container of the drug should not be thrown into landfills or water bodies. Do not use empty containers under any circumstances: they must be burned in a specially designated place, being careful not to inhale the smoke.

Advantages and features of use

The advantages of using the drug are as follows:

High efficiency in protecting plants from mites, thrips and other insects;
Minimal impact on beneficial entomofauna;
Suppresses pests on the upper and lower sides of the leaf;
Enteric-contact mechanism of action;
The long (up to 3 weeks) period of protective action allows for only 2-3 treatments;
Does not have a phytotoxic effect on plants;
Allows you to start harvesting vegetable products in protected soil 2 days after treatment;
Does not leave stains on plants.

There are a number of features of the drug that must be taken into account when using:

a) Stability. The drug "Fitoverm" is photoinstable, since the substances "Avermectin" decompose very quickly under the influence of air and ultraviolet rays. Therefore, it is recommended to treat plants against insects better in the evening, in the dark.

b) “Fitoverm” refers to intestinal-type drugs, so there are some restrictions for insects that do not feed. When treating in greenhouses or other indoor areas, it is recommended to increase the temperature to speed up the feeding of the pest and the hatching of larvae from eggs. So, when processing indoor flowers, it is recommended to place them in plastic bags after spraying to increase the temperature and enhance the effect of the drug.

c) Compatibility. Fitoverm is compatible with most insecticides, acaricides and fungicides. The best combination is provided with hormonal drugs that interrupt the pest’s development cycle.

Compatibility

Fitoverm is compatible with:

Pyrethroids;
Organophosphate insecticides;
Fertilizers;
Growth regulators (Zircon, Epin);
Fungicides, except those that have an alkaline reaction!

Important! If Fitoverm precipitates when mixed, then the drugs are not compatible.

Sellers offer, in addition to the drug Fitoverm, also “Fitoverm CE” and “Fitoverm P”. They differ:

Fitoverm CE is an anti-acaricidal agent for the fight against ticks. It is more effective against ticks than Fitoverm.
Fitoverm P is a means to combat nematodes.

That is, Fitoverm is a complex drug, and Fitoverm CE and Fitoverm P are not complex products.

Description of the drug Fitoverm

Chemical and biological pest control products are available for sale. The latter are distinguished by their soft action and safety. They do not harm the environment and are only in some cases dangerous to bees and other beneficial insects. Fitoverm is a well-known biological insecticide. It can be used at home, in greenhouses, greenhouses and in open ground against many types of pests.

Fitoverm against aphids

Fitoverm has a contact-intestinal effect. Destroys larvae, caterpillars and adult insects. The active component is aversectin (2 g/l). This is a metabolic product of the Streptomyces fungus that lives in the soil. When it enters the insect's body or esophagus, it is absorbed into the tissue and attacks the nervous system, causing paralysis. The effect of the drug is not observed immediately after use, but affected individuals cannot survive.

Interesting! The Fitoverm insecticide can be used at different periods of the plant growing season. Thanks to this feature, gardeners often choose this particular product to kill pests on the site.

The drug is a liquid substance. An unexpired product will be clear, without sediment or turbidity. Its smell is pungent, unpleasant, and even after dilution, it does not go away. It is used to process a wide variety of plant species that grow in the garden or vegetable garden. It is also suitable for killing pests on indoor plants.

Fitoverm for spider mites

The product is available in bottles and ampoules. For indoor plants or small areas, you can purchase a 2 ml or 4 ml ampoule. This will be enough for one-time use. There is also Fitoverm in 5 ml ampoules - this is the most practical option. Well, for regular use or large plantations that need treatment, you can purchase the drug in 10-400 ml bottles or 1-5 liter canisters.

Large canisters, bottles or ampoules of Fitoverm are always accompanied by detailed instructions for use, which also outline safety measures and exact dosages so that the buyer understands how to dilute and how to use the drug.

Security measures

Despite its natural composition, Fitoverm is a toxic product with a hazard class 3 for humans, so it is necessary to work with it while observing safety precautions:

Wear protective equipment: gloves, goggles, respirator.
Clothing should fit the body well and cover it completely.
The solution is prepared only in special containers. Do not dilute the insecticide in kitchen utensils.
When working with the drug, do not drink, smoke or eat.
When spraying, there should be no children or animals nearby, as well as ponds and aquariums.

Important! In case of contact with mucous membranes, the area should be rinsed well with clean water.

If Fitoverm gets inside the body, you must induce vomiting, drink activated carbon at the rate of 1 tablet per 10 kg of weight and consult a doctor.

After use, wash the container thoroughly and put it out of the reach of small children and animals. Clothes are washed and showered.

The solution must be used immediately after preparation.

Important! Do not use the insecticide after the expiration date.

Disadvantages of Fitoverm

When using an insecticide, gardeners often note its disadvantages.

Fitoverm against the Colorado potato beetle

It is better not to use this product during flowering periods, so as not to harm the bees. The product may kill the bee or affect the taste and quality of the pollen. So bees will not pollinate treated crops.
Before use, it is worth adding an adhesive to the solution, since the product hardly sticks to the leaves and drains quickly.

Important! Fitoverm simply destroys pests. It has no positive effect on plant development

When using it, there is no improvement in the taste, color of the fruit or an increase in the amount of yield.

Do not use it in or before rain, otherwise the effectiveness will decrease.
Fitoverm has an unpleasant smell. It is very sharp, repulsive and takes a long time to wear off.
To completely destroy pests on plants, 2-3 treatments with Fitoverm are required.
This product cannot be combined with chemicals.

Despite the obvious disadvantages, Fitoverm is often chosen by gardeners and gardeners. Indeed, among biological insecticides this is one of the best remedies. It completely destroys mites and aphids in just a week, and with repeated treatment it also copes with young individuals that have just hatched from eggs.

Pros and cons of Fitoverm

Fitoverm is a fourth generation pest control product , the main advantage of which is its minimal harmful effect on the soil, flora and beneficial fauna of the site.

Among the advantages of the drug we can also highlight:

High efficiency and a long list of pests destroyed.
Versatility. Suitable for use on all plants in the garden, garden and home; it does not inhibit their development.
Dual mechanism of action - through the skin and intestines of insects.
The long period of plant protection - up to 20 days - allows you to get by with only 2-3 treatments per season.
Complete safety for plants.
Rapid deactivation - the crop is safe to harvest within 48 hours after treatment, does not accumulate in either fruits or foliage.
Convenient packaging. You can choose the volume of the drug that is needed for your purposes.
No addiction. The effectiveness of the pesticide does not decrease over 5-6 seasons of consistent use.
Good compatibility with most drugs on the market.
It is especially effective in hot weather, unlike most chemical products.

Despite all these advantages, Fitoverm does not solve all pest problems due to some disadvantages:

Photoinstability, that is, the drug instantly decomposes in light.
Instability on leaves. The solution adheres weakly to plants and is quickly washed away by precipitation and dew. Therefore, it is recommended to add soap or store-bought adhesives to the liquid.
Selectivity in action. Pest larvae and eggs do not take part in feeding, so some of them survive treatment. Ticks also often hide in the veins of leaves, so many individuals manage to avoid contact with the poison.
Expensive. Especially in comparison with similar drugs based on nuclear chemistry.
Unpleasant (although not strong) odor.
Toxicity to bees and other pollinators.
Cannot be applied to the soil.
The working solution is not stored for longer than one day.

Mechanism of action and active substance

Since Fitoverm is a biological product, its active ingredient is made from the metaplasm of fungi living in the soil. Mushrooms belong to the genus Streptomyces. A substance called aversectin C is isolated from the metaplasm, which is the basis of the biological product.

When animals devour the leaves and shoots of a plant irrigated with a biological product, aversectin C enters the gastrointestinal tract of the pests and, penetrating through it into the cell tissue, begins to act after 12 hours. A paralyzed pest cannot move and, accordingly, cannot feed. As a result of exhaustion, the insect dies 72 hours after the product begins to act.

Treatment of indoor and other plants with Fitoverm against sucking insects and acarids has a somewhat slower effect, so the pests die no earlier than after 5-7 days.

Due to the fact that the effect of the product occurs through the stomach, the larvae do not die. To completely destroy all insects, at least three to four treatments will be required.

Did you know? Decomposition of an insecticide that gets into the soil occurs within 24 hours; in open space it disintegrates after two days. The decay period of other products is about a month.

Reviews about the use of the drug for flowers

Lyudmila: “I regularly treat all indoor flowers with Fitoverm. They are on the balcony on the first floor, so someone is always getting into them. There were no problems with the drug. The main condition is to treat several times, even after the symptoms disappear.”

Evgeniya: “I tried to save the violets from the mite. I put the flowers in the bathroom and thoroughly treated them with a 2 ml solution, but the drug did not help. I probably discovered the problem too late.”

Ekaterina: “I have 5 orchids. Recently I found mites under the leaves on two flowers. Just in case, I treated the entire flowerbed at once: 3 treatments, dosage 2 ml/l. I’m happy with the result, now the flowers are in perfect order!”

5/5 — (1 vote)

Formulas, action, modifications

The active principle of Fitoverm belongs to avermectins - substances produced by the actinomycete fungus Streptomyces avermitilis. Avermectins are extracted from the mycelial mass of the fungus by ethanol (alcohol) extraction. A feature of avermectins is a dual nerve-paralytic effect on pests: they stimulate the release of γ-aminobutyric acid in neuronal synapses and at the same time block chloride transmission channels to dependent receptors.

The chloride current in the nerves is disrupted and the entire nervous system goes into disarray. This process is quite slow, but the resistance (persistence) of pests to Fitoverm develops with great difficulty. In practice, Fitoverm can be regularly used on plants for 5-6 years, without fear of breeding a resistant population of plants. And if this occurs, it is enough to switch to other pesticides for a year or two so that the susceptibility of pests to Fitoverm is restored.

Modifications of the active ingredient Fitoverma

However, Fitoverm has a very serious nuance regarding the users’ own safety: there are 2 series of modifications of avermectins, due to the so-called. spatial isomerism of molecules: Aij and Bij. In foreign preparations and domestic ones made from foreign raw materials, the active substance is avermectin Bij (on the left in the figure). Avermectins Bij are stronger, but more toxic (hazard class 2-3), accumulate in fruits and are approved for use in the EU only for inedible crops. However, “European-oriented” manufacturers have no hesitation in introducing them into widely advertised products for the garden and city.

In the Russian Federation, only Fitoverm based on avermectins Aij (center in the figure) is approved for use in individual households. It is produced by LLC NBC "Pharmbiomed" (right); extracted from strains of the producing fungus VNIISKHM-51 or VNIISKHM-54 bred in Russia. Fitoverm from Pharmbiomed can be safely used in a country house, garden plot or farm, while others (Letto, Plantafol, OptiRoza, Fitoverm from other manufacturers) are only suitable for inedible crops and indoor plants - they have a stronger effect on pests, but they should not be used Not recommended for fruits and vegetables. By the way, the inexpensive Pharmbiomedov’s Fitoverm also helps a lot against pests of open ground roses, see for example. video clip:

Release forms

Fitoverm for indoor gardening is available in concentrated emulsion (CE) ampoules of 2 and 4 ml. For use outdoors in bottles of 5, 10, 30, 50 ml of EC and 100, 200, 400 ml and in canisters of 5 liters of MP stock solution. For professional use - in the form of P powder. The content of the active substance EC is 2 or 10 g/l; MP – 2 g/l; P – 2 or 8 g/l. The MR 5 l and P formalities are not used in individual farms.

It is also undesirable to use MR, because It cannot be stored in opened packaging. Fitoverm CE can be taken from an unopened bottle with a syringe in parts, piercing the stopper with a needle, then the shelf life of the drug is not reduced. Fitoverm is stored and diluted according to the general rules for liquid biological products, see video:

Reviews

Maria: the drug is relatively safe, does not overwhelm you with the smell, but requires several treatments. I used it on roses and was pleased.

Marina: I was captivated by the fact that Fitoverm is of biological origin. In addition, it has an affordable price, it dissolves well in water and does not smell very much (sorry). I also liked the fact that the ampoules are not glass (I usually cut my hands with them), but plastic. Well, I liked the effect: not lightning fast, but reliable.

Agasha: This is not the first time I have encountered spider mites on indoor plants, so I know a lot about preparations. I bought Fitoverm because it is relatively safe for the environment. I had to spray the plants twice, but I didn’t expect quick results: I also treated them with Actellik twice. The second treatment is a control shot. I heard people complain about the smell of Fitoverm. People, you probably haven’t snorted any other drugs!

How to use Spark Double effect against pests

Sergey: this drug is relatively harmless to the environment, therefore, probably, its effectiveness in the fight against parasites is very relative. I treated currants against aphids with Fitoverm, but the result was more than modest. I had to use the proven Kinmiks. Maybe I was in a hurry and should have waited...

Anatoly: I used Fitoverm against spider mites on cucumbers in a greenhouse. After processing, I closed the greenhouse and entered it only the next morning. The cucumber leaves, which were withered, perked up slightly, and after two days their turgor was completely restored. Just in case, I re-processed it. Since then the ticks have not appeared.

Official website and manufacturer's recommendations: https://dacha.avgust.com/catalog/fitoverm/

How to dilute Fitoverm and method of application

Initially, the solution is prepared in a small amount of water. While stirring the product, you need to add liquid to the required volume, which varies depending on the disease and the type of plant. It is necessary to prepare the solution only if it will be used on the same day.

Dilution of the solution

You cannot prepare a solution from Fitoverm and other chemicals, but it is permissible to mix it with biostimulants. Before using the resulting solution, you should check the compatibility of the mixed drugs: if a precipitate appears in the solution, the drugs are incompatible. Flower processing can be done using a manual or mechanical sprayer.

Thrips

Thrips are the most common pests of ornamental crops. To combat them, you need to dissolve 2 ml of the drug in 200 ml of water. The flower needs to be sprayed with a spray bottle. You can also wipe the leaves of the plant with a sponge soaked in the solution.

The frequency of treatments depends on the size, age of the flower and the number of parasites on it. On average, 4 sprays will be enough to get rid of insects. The treatment interval is 5-8 days. The drug begins to act after 3-5 days. After the last spraying, the flower can be treated with the strengthening agent Epin.

Spider mite

To remove spider mites with Fitoverm, you will need to dissolve the ampoule in a liter of water. The maximum number of plant treatments is 4.

The procedure must be repeated after a week or 10 days. Orchid and ficus leaves should be wiped with a cotton swab dipped in a solution; other house plants can be sprayed with a spray bottle.

Aphid

Aphids most often infest indoor roses. To remove insects, two capsules of the product (8 ml) diluted in 1 liter of liquid are enough.

A solution of this concentration is suitable for all domestic plants on which aphids have appeared. Insects die after 2-3 days. It is required to carry out 2-3 procedures at intervals of a week.

Whitefly

To kill flying insects, the volume of liquid and chemical must be increased. Therefore, a whitefly solution must be prepared from 1.5 liters of water and 6 ml of insecticide. To remove the insect, two sprays are enough. The interval between procedures is a week. The effect of the drug is noticeable after three days.

Questions from summer residents

Fitoverm - what pests does it help with?

Fitoverm is a universal insecticide because it helps to effectively combat most insect pests that attack vegetable crops, berry bushes and fruit trees. There are more than 20 varieties of such “harmful” bugs.

How to prepare a Fitoverm solution to kill spider mites - video

How to dilute fitoverm for cucumbers?

Fitoverm for treating cucumbers against spider mites and thrips is diluted in the following proportion: for every liter of water you need 10 ml of the drug.

How to breed phytoverm for spraying roses?

To spray rose bushes against most pests, you need to take 2 ml of Fitoverm for each liter of water. For each square of area, about 0.15 ml of the prepared solution is required. If necessary, the treatment will be repeated once every 3 weeks.

Fitoverm and Fitosporin - what is the difference and are they compatible?

The active substance in Fitoverm is aversectin C, which destroys pests. And Fitosporin is a biofungicide that is most often used to destroy mold on the soil surface when growing seedlings of vegetables and flowers.

How to dilute Fitoverm for processing strawberries?

To treat strawberry bushes, prepare the solution as follows: for each liter of water, 2 ml of Fitoverm is required. To treat 1 m2 of strawberry plantation you need 0.1 ml of solution.

How to dilute Fitoverm for spraying cabbage?

To prepare a Fitoverm solution for treating cabbage, 8 mg of the drug is needed for each liter of water.

To treat 100 m2 of vegetable garden, 4 liters of solution are required.

Step-by-step instructions for use

It wouldn’t hurt every gardener to have Fitoverm at home. For indoor flowers, I use the preparation in 2 ml plastic ampoules. And this amount is enough for me to treat the plants on all the window sills of my three-room apartment.

So, the drug is a packaging bag containing a 2 ml plastic ampoule.

The ampoule is convenient for one-time use and safe to open. There are detailed instructions on the back of the package.

Since the photo is not very clear, I compiled a table of dosages of the drug Fitoverm:

So, we see that for indoor flowers against spider mites, the entire contents of a 2 ml ampoule must be dissolved in 1 liter of water.

Against aphids: 1 ampoule per 250 ml (0.25 l) of water.

Against thrips: 1 ampoule per 200 ml (0.2 l) of water.

Since in this case my gardenia is being eaten by thrips, I took a sprayer with a capacity of just 0.2 liters, poured settled water into it for irrigation and dissolved the contents of the ampoule there. Mixed well.

Having received the working solution, we go to war - treat the plants. Of course, if one flower is damaged, you need to treat not only it, but also all its neighbors. The safety instructions are written in the instructions:

I do not completely follow these rules, but in no case am I encouraging anyone to do the same. I usually process in a well-ventilated area, wearing gloves, I try not to inhale the fumes from the sprayer, I wash my hands and face, but I do without special clothing or a respirator.

You can spray the affected plants and water the soil in pots with the same solution, since some types of pests can also be found in the soil or lay larvae there.

After 7 days, it is recommended to repeat the treatment to consolidate the result.

It is worth saying that in the summer, preventive spraying with Fitoverm at least once a month is necessary, because this is the time of greatest activity and spread of all kinds of pests.

Reviews about the drug are mostly positive, many use it as first aid for their plants. He also helped me out more than once, and this time my gardenia was saved.

Don't forget that Fitoverm can also be used for seedlings of vegetables and flowers! This is very important during the seedling season.

Shelf life and storage

The insecticide is stored in a dry and dark place where animals and children cannot reach it. It retains its properties in the temperature range from -15 to +30 degrees for 2 years from the date of manufacture.

The remaining product from the opened ampoule is poured into a clean medicine bottle or syringe and used within a month.

Fitoverm working solution is used on the day of preparation; it is not stored at all. It is poured into a sink or into the soil where animals do not walk and crops do not grow. You can also irrigate the soil in pots with home flowers with the solution if you notice signs of aphids or other pests on them.

Video about an interesting method of storing the drug:

Indications for use

Fitoverm helps to destroy most of the harmful insects that attack indoor flowers. The most dangerous among them are the following:

Aphid. Green, yellow or black insects, the body length of which reaches 5 mm. In those areas of crops where the pest infests, stickiness increases, shoots and flowers begin to wither and wither, curl into a tube and become deformed.
Thrips. The insect is so small that it is almost impossible to detect with the naked eye. Its presence can be determined only by the lightened dots - the results of its life activity on plants. They affect not only foliage, but also flowers with buds.
Whiteflies. Small pests that weaken crops. In appearance they resemble small butterflies. They can be found on the inside of the leaf. After shaking the plant, the insects fly away in different directions.
Spider mites. Another pest that covers the plant with a thin light cobweb. Foliage damaged by them loses its rich color, becomes covered with whitish spots and most often dies.

Purpose

Fitoverm is a broad-spectrum drug that is directed against sucking and leaf-eating pests. Such as:

Plant mites.
Colorado beetle.
Scale insects.
Sawflies.
Leaf rollers.
Codling moths.
Moths.
Thrips.
Aphid.
Gall mites, etc.

The drug is used to combat mites and scale insects that infect indoor plants. The acaricidal activity of the product allows you to destroy the Schlechtendahl mite.

If indoor flowers were purchased with scale insects or scale insects, you can get rid of them in a couple of treatments. Even novice flower growers can cope with this.

Fitoverm protects for:

1-3 weeks – cultivated plants with a closed root system;
5-24 days – plants with an open root system.
for indoor plants, protection lasts longer, since the plants are not re-infected from a neighboring area.

Doses for plants

This is how the drug “Fitoverm” is used. The instructions for use discussed above, as you can see, do not include too many steps.

One ampoule of the product usually contains 2-4 ml of the drug. The table below shows its dosage for popular plant species.

Culture	Pest	Dose (ml/l water)	Periodicity
Pumpkin, tomatoes	Mite	2	As it appears
Thrips	0.2	15-20 days
Aphid	0.3-0.5
Apple tree	Ticks, leaf rollers	1	As it appears
Currant	Ticks, moths, leaf rollers	1
Houseplants	Mite	1
Thrips	0.2
Aphid	0.25
Cabbage	Caterpillars of armyworms and white moths	0.5

As you can see, the dose is usually not too high. For some other plants, a stronger solution of the Fitoverm preparation should be used. The instructions for use for strawberries given above confirm this. The fact is that ticks on this plant, unlike bushes and fruit trees, are very difficult to remove.

In order for this drug to work, it must enter the insect's body. The pest must eat leaves during treatment. However, some insects feed periodically every other day. Therefore, after a couple of days it is advisable to carry out a control treatment. The above doses must be observed. This is a guarantee of operational safety and effectiveness of the Fitoverm drug. The instructions for use must also be followed exactly. Do not spray plants in cold weather or during the heat of the day.

Fitoverm: reviews on the use of the product

Olga, 45 years old, Moscow region: In my garden plot, a significant area is occupied by flowers, most of which are occupied by rose bushes. To prevent my flower beds from being invaded by various pests, I regularly (at least once every 3 weeks) carry out preventive treatment of the flower beds with Fitoverm solution. This insecticide is universal and effectively destroys almost all “harmful” bugs in the flower garden. Therefore, there is no need to use other drugs for treatment.

Natalya, 60 years old, Volgograd region: A large number of different vegetables grow in my garden. And very often they suffer from an invasion of pests - the Colorado potato beetle, aphids, spider mites and some others. Previously, it was necessary to use different insecticides to treat plants. But for the last two years I have been using only Fitoverm for treatment, with the help of which I successfully fight all “harmful” bugs.

Judging by the popularity of the drug Fitoverm, its ease of use, effectiveness in combating most pests and the rapid removal of the insecticide from the fruits and foliage of cultivated plants appealed to gardeners and vegetable growers.

Recently searched:

Signs of insect parasitism

If you find that the leaves are sticky, it means that scale insects have settled. They may still be invisible, but they already give off a secret. As the insects grow, brown, green, and yellow tubercles are found along the veins of the leaves. These are scale insects that are attached to the leaves, usually from below, but can be from above.

The leaves become spotted and then turn yellow. Insects drink the juice, so the buds on the flowers fall off and the development of the stems is incorrect. Signs of rapid plant death: growth gradually stops, leaves fall off, and the bush dries out.

How to get rid of scale insects on indoor plants

Scale insects and its species are destroyed in similar ways. The presence of a shield on the pests complicates the fight. If you find a plant infected with scale insects, isolate it from other plants by moving it to another place.

Scale insects on leaves and stems must be removed using a cotton swab (soft toothbrush) soaked in a soap solution or insecticide solution. Some gardeners use alcohol - but there is a risk of burns on the leaves.

I make an alcohol solution with soap like this:

15 g soap (can be liquid), 10 ml. alcohol, 1 liter of water. If the leaves of the plants are soft and thin, treat only pests, not the entire surface of the leaf.

This way you will remove all young and adult individuals from the plant.

Speed of impact on the pest

6 hours after application, the gnawing insects stop feeding and do not move at all for some time. Then they die. As for sucking pests, the effect of the drug can last up to 12 hours. After this time, the insects no longer feed, but die after a few days.

It will take you about a week to completely get rid of parasites. In this case, the leaves will remain fatal to them for another 3 weeks.

Period of protective action

Indoors, violets remain protected for one to three weeks after treatment . The protection time depends on the type of pest.

Tick and flea repellent

Flea and tick repellents with the active ingredient imidacloprid (finpronil, cypermethrin) effectively help get rid of scale insects on indoor flowers. For example, drops - “Advantix” (540 rubles), “Avanpost” (250 rubles).

After 1, 2, 3 points from the general instructions.

Mix the drops with water: a small pipette in 500 ml, and a large pipette in a liter of warm water.
Moisten the leaves, axils, petioles and stem of the plant, as well as the top layer of the substrate, with this emulsion on both sides.
After the solution has dried, ventilate the room. The solution does not need to be washed off, and if the odor is strong, it can be washed off every other day with water.

As a rule, one procedure is enough; if necessary, repeat after a week.

If you cannot re-process the flower, then you can cover the pot with a bag (garbage) and leave a gap. Spray the plant with Bolfo aerosol (400 rubles) for 3-4 seconds, tie the bag and leave the flower for 24 hours - the scale insect will suffocate.

IMPORTANT! Carry out all procedures only in the open air or on the balcony!

The drugs "Tanrek" and "Confidor" contain a similar active ingredient, so you can safely use them, especially since they are much cheaper.

Processing rules

Preparation of the working solution is carried out immediately before using the drug in compliance with the dosages. For dilution, do not use containers in which food is prepared ; after use, they must be thoroughly washed. It is better to use disposable tableware. How to dilute Fitoverm is indicated in the article below.

When choosing a treatment day, pay attention to the weather. On a rainy day or with high humidity, the treatment will not bring the desired results. It was noticed that on a hot day (air temperature from 24 to 32 °C) the effect of using the drug against spider mites increases up to 4.8 times, and when the temperature drops to 17 ○C, it drops by 7.6 times.

To treat cultivated plants with Fitoverm, use a spray bottle. At the same time, make sure that the product is distributed evenly - it is under these conditions that most pests die. In this way, fruit trees and abundantly vegetating plants are treated.

Indoor plants are treated by carefully lubricating each leaf on both sides with the solution. The remains of the drug are poured onto the soil in the pot . This is necessary because splashes and vapors of the drug in a closed room can enter the lungs.

Fitoverm must be used at least four times, with an interval of 7-9 days.